This article originally appeared on CheckingInWithChelsea.com.

Influenced by currently trending raffia-included furniture, I’m displaying you how to develop your have Tv console desk covered in wallpaper for $150!

**I partnered with Titebond for this job which makes me genuinely energized because…I employed their original wood glue and ONLY their wood glue to maintain my total table alongside one another! What?!**

The aim for my property was a tall and extensive table with out any noticeable supports that broke up the cleanse strains. The over-all dimensions of my concluded table are 70″ wide and 35″ tall. So continue to keep that in brain with the resources and minimize lists beneath!

What to Get

What to Minimize

1x2s:

  • (4) @ 32″
  • (7) @ 14-1/2″
  • (2) @ 70″

3/4″ plywood:

  • (4) 32″ very long x 16″ wide
  • (2) 70″ lengthy x 16″ extensive

Making the Console Table Packing containers

Primarily we are building 3 individual bins. 2 will be the legs and 1 will be the tabletop.

Commence with the 2 scaled-down containers (legs) to get your feet wet. Lay a 32″ piece of plywood down and include your Titebond wooden glue together the prime side of all 4 edges. Then lay a 1×2 on its side on top of the glue, creating confident it’s flush with the edge of the plywood.

The 32″ pieces of 1×2 will go from edge to edge of the plywood though the 14.5″ parts should healthy snuggly between.

Lining Up 1x2 to Create 3 Inch Console Table Leg

At the time you have the 1x2s lined up on the edges just so, operate a bead of wood glue on the top of them.

Applying Titebond Wood Glue to Hold Table Leg Together

Carefully set a different 32″ piece of plywood on major. Now your box leg is full!

First Leg Box Assembled for Console Table

Repeat for the other leg, working with a couple of clamps if vital to generate super tight joints!

You are going to observe the exact measures to produce the tabletop, only you will incorporate an more 14.5″ 1×2 aid someplace in the center. This will enable keep the lengthy 1x2s from sinking in and incorporate overall security to the table.

Waiting around is the Most difficult Component

If you’ve ever tried using to pry wooden apart that is been glued with Titebond, even for a few minutes, you know it’s mainly extremely hard to do perfectly.

And that is why you really don’t have to have any nails or screws to hold your table with each other. Wooden glue, when absolutely dried and remedied, is really more powerful than fasteners! So crazy but oh so genuine!

Permit your 3 containers dry and established up for at least 30 minutes in advance of shifting on to the future action.

Adding Legs to the Desk Best

Assuming your ground is degree, set your leg packing containers upright, around 70″ apart. Apply sufficient amounts of wood glue to the tippy major of your legs and gently established the tabletop in position. Regulate the major so it is flush with the outdoors of your leg on one side prior to altering the other leg.

For a desk this significant, it would be useful to have a friend or partner hold the very good side in area when you manipulate the other aspect. But with a several again-and-forths, you can deal with it oneself also!

Adjusting Legs with Speed Square as Gauge

I used a pace sq. to make positive the legs had been at 90-degree angles. Not a poor software to have in your arsenal if you really do not have one already!

When you are contented with your leg scenario, enable it sit for about 30 minutes ahead of you begin masking anything in wallpaper!

Adhering Wallpaper to the Console Table

I like the texture of a raffia or light-weight-coloured wood desk. And just after a close friend shared an low-cost peel-and-adhere wallpaper she applied that seemed like faux grasscloth, I understood I could use that to make the texture I needed for this piece of furnishings.

I also wished the table to seem like 1 slab of wood. To make that impact with the wallpaper, I began at the bottom of one particular leg, took it up and over the major, and then down the other leg without having any cuts or seams. I also lined it up with the again edge of the table so it could fold and go down the entrance edge devoid of any seams.

Hopefully, the video far better illustrates how I dealt with the corners, so enjoy it previously mentioned! I experienced the paper that arrived from the tabletop beneath the paper from the legs. Then I scored on the paper alone the 45-diploma angle from the inside corner to the exterior corner of the wood framework. I slice any excessive paper from the best and then caught it down. Next, I slash the layer of paper coming from the legs alongside the line I just scored. So when all the things was laid flat and caught down very good, it seems like my legs and tabletop ended up mitered alongside one another.

Plywood and 1x2s Covered in Wallpaper

Originally I planned to diligently trim the extra at the end of the front edge, but considering the fact that it folded so properly devoid of any bubbling, I folded the inch or so extra and trapped it to the inside of of the table.

And that acquired coated up following with yet another operate of wallpaper. I acquired ample wallpaper (2 rolls) to protect the inside of of the legs and the underside of the tabletop. And considering the fact that I was significantly less concerned on the underside about viewing seams, I lined them independently and ended up not masking the underside of the tabletop alone. You really just can’t see it throughout every day use and it saved me $27 by not opening the 2nd roll.🤷‍♀️

Details of Grasscloth Wallpaper Used on Console Table

Oh and for the legs, the inside of wallpaper was flush with the entrance edge so the excessive was just folded above and trapped on to the back again of the legs. Indeed, it appears to be like unfinished from the backside. BUT WHO CARES?!

Vibrant Coastal Living Room with Frame TV

The only place I required to trim wallpaper was at the foundation of the legs. I propped up a single leg at a time with a scrap piece of 1×2 so I could trim it as specifically as feasible. I didn’t want any sliver of wood demonstrating and offering absent my table’s secrets!

About an hour or so after finishing the table, there was nevertheless a tiny wobble to it if you shifted it from facet to side. But soon after leaving it on your own overnight, the wiggle was gone and this desk was sturdy, steady and all set to transfer to its new property!

DIY Raffia Grasscloth Wrapped Large Console Parsons Table

I ordered our poufs from Residence Depot* to serve as decoration AND additional seating. They are like innovative beanbag chairs and the young children have already pulled them out to sit and roll about a number of occasions!

Modern Living Room Raffia Wrapped Skinny Table

The wallpaper at the rear of the Television and console was just lately hung to generate an accent wall. I like it by itself but I’m still striving to determine out if I like the room as a complete with the wallpaper in it.🤔

TV Console Table with Green and Gold Ginkgo Wallpaper

But we do really like the sleekness of our Frame Television*! It was a splurge we taken care of ourselves to when our past house sold for way above the inquiring cost. Now I’m pondering I could possibly brush some gold paint on the frame to match other gold frames in the space. The assignments and thoughts by no means end close to in this article! Ha!

DIY Console Table Build Covered in Wallpaper

*This post consists of affiliate backlinks.*


Even further Looking through

Leave a Reply