Garage Door Maintenance Checklist

Garage Door Maintenance Checklist

Your garage door moves several times a year. While we may be enjoying its smooth operation, we don’t notice it much until it breaks down. 

If you don’t want damage to happen to your garage door, it’s essential to pay attention to it every time. 

The best method to keep it from breaking is to keep up with regular maintenance. With maintenance, you can spot potential damages that become major ones. 

For this reason, follow the maintenance checklist below to maintain the condition of your garage door. 

Conduct a Visual Inspection

When doing a visual inspection, close the garage door first to allow you to see every part of it. 

Inspect the garage door itself for potential issues. Check the condition of the hardware components such as bolts, nuts, screws, and hinges.

If you spot loosen hardware parts, tighten them using an open or socket wrench. 

Also, check the springs, cables, rollers, and tracks for signs of wear and tear. If you see such conditions, call a garage door repair in Santa Ana to fix it. 

In this way, you’ll prevent more significant damages from occurring. 

Clean the Tracks

The best way to maintain the garage door is to give it a regular cleaning. Besides, ensuring that your garage door is clean is an essential part of maintenance. 

Clear the tracks from any debris and dust. Remove the dirt with a clean cloth or small brush to the brakes to keep the garage door in condition. 

However, when it comes to tracks, avoid greasing since it can easily trap debris and dirt. 

Check the Garage Door’s Balance

If you want your garage door to be in good condition, make sure to test the balance. 

If it’s not balanced, it might put stress on the garage door opener, allowing it to work hard than usual. 

As a result, the garage door opener won’t last long. 

To test the balance:

  1. Disengage the garage door opener from the power outlet, and disconnect the garage door from the opener mechanism.
  1. Lift the garage door manually until it reaches midway.
  1. Lastly, release it. 

After you leave the garage door ajar or open, it should stay in place. If it doesn’t remain open and immediately sags, it is not balanced. 

The reason might be due to the springs. If they are damaged, the garage door won’t stay put. 

With this kind of situation, it’s best to adjust or repair the springs. Call a professional if you’re in Etobicoke and Ottawa.  

Lubricate the Moving Parts

Lastly, don’t forget to lubricate the moving parts, especially if you spot any wearing and corrosion. 

In this way, you’ll avoid friction that can happen to each part of the garage door. As a result, you’ll be able to extend its life. 

We often think lubrication is a tedious task, but it is not. If you want to minimize the noise produced by the moving parts, then you should lubricate them. 

Make sure to use lithium or silicone-based grease on the corroded parts. Apply it sparingly and remove any excess to avoid dirt sticking into them. 

The Takeaway

The garage door is part of your home. Hence, you need to pay attention to it if you don’t want it to get damaged. 

By doing regular maintenance, you can expect that your garage door will last longer. It will also save you money in the long term because issues can be detected easily. 

Make sure to follow the garage door maintenance checklist above. 

If you detect a problem with your garage door, then that’s the time you should call for a garage door repair in Oakridge and Etobicoke.